The Fischer AutoTank is the world's most environmentally friendly (green) x-ray film processor in the world. This unique processor works without heat at normal room temperature, and requires no plumbing.
Normal heated x-ray film processors use about 5 gallons of developer and 5 gallons of fixer per month. The AutoTank owner should be able to get by with only 2.5 gallons of developer and fixer every 2 months! Save 75% on chemical use.
In a heated x-ray film processor, water use can be excessive. In normal operation, gallons will be used daily. When water solenoid valves in x-ray film processors fail, they invariably fail in the open position, running gallons and gallons of water down your drain EVERY HOUR. With the AutoTank, we do suggest a water change of 2.3 gallons every 2 weeks. Talk about savings and water conservation!
The AutoTank is always turned OFF, but ready to develop x-ray films at any time. Just turn it ON, run the films, and turn it back OFF when done. Heated x-ray film processors are meant to be turned ON and left ON ALL DAY LONG. Pumps and heaters run in heated x-ray film processors ALL DAY LONG. When we claim that the AutoTank will reduce energy use by over 90%, we are being conservative.
Save 75% on chemical use.
Save 90%+ on water use.
Save 90%+ on energy use.
By using the AutoTank, you will be making the world a greener place to live, and you will be making your wallet full of a lot more green. See http://www.fischerind.com/autotnk.htm for product details.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment